Heat Shrink PVC Film Printing Inks

Product Details: Minimum Order Quantity 1000 Kilogram Color CMYK Pack Size 5 - 20 kg Form Liquid Packaging Type Drums Printng Type Flexographic, Rotogravure Printing Applications Flexible packaging of all kinds, plastic foils and container, glass, labels, cosmetics, toys, etc. Printing Materials Non-Porous and Porous Print Standards ISO 9001:2000 Ink Type Water and Solvent Based Pvc Heat Shrink Label Inks Based on NC & Poly amide Resin for treated Polyethylene, Polypropylene PVC and wide range of Olefinic substrates. Gravure Surface Printing Concentrated Poly Inks Based on NC & Polyamide Resin are designed for surface printing on Gravure machines with cylinders. Features: Excellent printability High gloss High strength Good tape release Good scuff resistance Good Crinkle resistance After addition of Hardners @ 5% at the time of printing, good alkali resistance, good adhesion and soap resistance is obtained. Hence our A.R inks after addition of Hardners are suitable for detergent pack printing. Recommended Application: For high quality, Tonal printing and fine line printing at high speed on Polyethylene Film Substrates: Can be printed on all types of Polyethylene, Polypropylene, PVC, PT, MST For Polythene and Polypropylene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties Printability: Excellent printability in Half Tone and good coverage in Full Tone Free from any printing defects such as streaking and scumming etc. Excellent rub and scratch resistance Diluents: The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions For Flexo: The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions. For Gravure: Recommended diluents are Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarded Colour Range: Full range of Pantone basic shades including Metallic and ARSR and Light Fast Shades Grinding: Less than 0.5 MICRONS % age Solids : 45 + 2 Light Fastness : Fair to good Heat Resistance : 1500 -2000 C Opacity / Transparency : Depending on colors to color Gloss : Good Drying Time : The process is Air drying at Room temperature within seconds Pacific Gravity : White Ink : 1.100-1.1500 g/cubic cm, Color Ink:0.880-0.970 g/cubic cm at 20 degrees Celsius Color Reduction : Chemicoat Poly Medium Storage & safety: Use the recommended thinner only Stir well before using, as phase separation may occur over time To keep away from Heat Reduction solvents: Is a blend of Toluene & Iso-Propyl Alcohol. Reduction of Gravure Concentrated Poly inks in the ratio of 1:1 as under Understirrer: Concentrated Ink : 1 Part Poly Medium : 1 Part Blend of IPA & Toluene : 1 Part Total : 3 Part The information in this data sheet has been carefully complied from our experience gained and detailed laboratory testing. However, the product performance and its suitability for the customers purpose depend on the particular condition of use and the material printed. We recommended that the customer satisfy themselves that each product meets their requirement in all respects before commencing a print run. Request Callback